UNI-SPRAY
- CLAMP-ON NOZZLE SELECTION GUIDE -
Uni-Spray Nozzles
...
are injection molded from custom blended polypropylene, a cost e-ective material that is corrosion and heat resistant and is
impervious to most chemicals. The Uni-Mix Tip design resists clogging and buildup due to its smooth shape and low
coe cient of friction. A wide variety of Uni-Spray Clamp-On Nozzles are available to suit your application and are colour
coded for easy identi cation (see table below). All nozzles are available with a Single Spring or an optional Double Spring
con guration for pressures over 60 psi (4.0 bar). All of the nozzles are available in three spigot sizes to t 21/32", 9/16" or 19mm
diameter holes in the riser
MARK I" Adjustable Nozzle Assembly...
permits nozzle directional adjustment of the nozzle tip anywhere within a 45° included angle. Interchangeable Nozzle Tips are
available in Full Cone, Hollow Cone or Flat Spray styles with various combinations of spray angle and ow rate. The Mark
I is also available with a Threaded Ball Connection in 1/8, 1/4, 3/8, and 1/2 inch NPT or BSP, allowing the use of any
threaded plastic, brass or steel nozzle.
"MARK II" Fixed Nozzle Adapter...
o-ers female threaded connections in 1/8, 1/4, 3/8 and 1/2 inch NPT or 1/8 BSP threads, allowing the use of any threaded
plastic, brass or steel nozzle.
Available Sizes...
The "Mark I" and "Mark II" Nozzle Assemblies are colour-coded for convenient identi cation, and are available to t the
following pipe sizes:
1 inch 25 mm blue
1-1/4 inch 32 mm red
1-1/2 inch 40 mm purple
2 inch 50 mm green
Uni-Spray Nozzles
...
are injection molded from custom blended polypropylene, a cost e-ective material that is corrosion and heat resistant and is
impervious to most chemicals. The Uni-Mix Tip design resists clogging and buildup due to its smooth shape and low
coe cient of friction. A wide variety of Uni-Spray Clamp-On Nozzles are available to suit your application and are colour
coded for easy identi cation (see table below). All nozzles are available with a Single Spring or an optional Double Spring
con guration for pressures over 60 psi (4.0 bar). All of the nozzles are available in three spigot sizes to t 21/32", 9/16" or 19mm
diameter holes in the riser.
UNI-SPRAY
- CLAMP-ON NOZZLE SELECTION GUIDE -
UNI-SPRAY SYSTEMS INC.
Major Dimensions
X Y
(inch)
1" Pipe
1-1/4" Pipe
1-1/2" Pipe
2" Pipe
(mm)
25 mm Pipe
32 mm Pipe
40 mm Pipe
50 mm Pipe
1.70
1.89
2.02
2.25
43.2
48.0
51.3
57.2
3.21
3.43
3.56
3.75
81.5
87.1
90.4
95.3
ALSO AVAILABLE WITH DOUBLE SPRINGS
FOR PRESSURES FROM 60 TO 150 PSI
(4.1 TO 10.3 BAR)
SELECT
NOZZLE TIP
AS REQUIRED
X Y
45°
CROSS SECTION OF PIPE
DRILL HOLE IN PIPE
SPRING:
SINGLE SHOWN
O-RING BODY CAP TIP
UNI-SPRAY "MARK I"
ADJUSTABLE NOZZLE ASSEMBLY
Features:
• inexpensive;
• corrosion resistant;
• impervious to most chemicals;
• good heat resistance;
• injection molded from custom blended polypropylene;
• standard with Single Spring Clamp;
• optional Double Spring Clamps for pressures over 60 psi (4.0 bar);
• resists clogging;
• directional adjustment of nozzle tip anywhere within 45°;
• tips available in Full Cone, Hollow Cone or Flat Spray congurations;
• tips available with threaded ball Connection in 1/8, 1/4, 3/8 and 1/2 inch NPT or BSP threads;
• nozzle bodies available in three spigot sizes to t either 21/32", 9/16" or 19mm diameter holes on the riser.
UNI-SPRAY SYSTEMS INC.
1 - 3
"MARK I" ADJUSTABLE NOZZLE ASS'Y
ORDERING INSTRUCTIONS
How To Order A Mark I Adjustable Nozzle Assembly:
The complete Part Number tells us exactly what assembly you want.
For example, let's say that you want to order a Mark I Adjustable Nozzle
Assembly to t on a 1-1/2 inch pipe, with a single spring, and with a 65° Flat
Spray Nozzle Tip that will deliver 3.5 gpm at 30 psi:
Step 1:
The Part Number begins with 'UNI' and the Pipe Size, as follows:
'UNI 100' = 1 inch pipe
'UNI 125' = 1-1/4 inch pipe
'UNI 150' = 1-1/2 inch pipe
'UNI 200' = 2 inch pipe
... so in our example, we would have so far...
'UNI 150 ...'
Step 2:
Select a Nozzle Tip from th tip selection page and add the Tip Number to the Part
Number, so in this example we now have...
'UNI 150 6540...'
Note that the 'UNI' in front of the Tip Number is dropped when
the Tip Number is incorporated into the Assembly.
Step 3:
Add 'M1' to denote the Style, which is standard with Single Spring. If it was to
have a Double Spring, the Style would be 'M1 D'.
So, in our example, we end up with...
'UNI 150 6540 M1'
Note: Our standard Nozzle Assemblies are designed with spigots to t risers
with 21/32" diameter drilled holes. We also manufacture assemblies with
smaller spigots for 9/16" diameter holes. To specify the 9/16" spigots, simply
change the 'UNI' in the part number to 'SS' for 'Small Spigot'. In that case,
using the example above, the part number would become...
'SS 150 6540 M1'
UNI-SPRAY SYSTEMS INC.
FLAT SPRAY NOZZLE TIP SELECTION DATA
Custom nozzle designs are available upon request!
For easy identification, all flat Spray nozzle tips have the tip numbers molded into the ends of the tips.
When ordering Nozzle Tips as spare parts, add 'TIP' after the part Number: e.g. 'UNI6540TIP'
UNI-SPRAY SYSTEMS INC.
Item
No.
Nozzle Tip
Part Number
Tip
Colour
Spray
Pattern
Capacity (US) GPM at PSI
5 10 15 20 30 35 40 60
Spray angle
10 psi 20 psi 30 psi
001
UNI 3040
UNI 4050
UNI 50100
UNI 5070
UNI 5060
UNI 5050
UNI 5040
UNI 5030
UNI 6560
UNI 6550
UNI 6540
UNI 6530
UNI 6520
UNI 8070
UNI 8060
UNI 8050
UNI 8040
UNI 8010
UNI 8006
UNI 9560
UNI 12010
UNI 12070
UNI-PLUG
Dk Green
Black
DK Green
Grey
Blue
Orange
Pink
Mauve
Blue
Green
Red
Yellow
Purple
Grey
Beige
Beige
DK Green
Beige
Black
Lt Green
DK Green
Grey
Black
Grey
30° Flat Spray
50° Flat Spray
40° Flat Spray
65° Flat Spray
50° Flat Spray
50° Flat Spray
50° Flat Spray
80° Flat Spray
80° Flat Spray
80° Flat Spray
80° Flat Spray
65° Flat Spray
65° Flat Spray
65° Flat Spray
65° Flat Spray
120° Flat Spray
120° Flat Spray
80° Flat Spray
80° Flat Spray
Plug to Blank-off Spray
95° Flat Spray
สนใจสอบถามข้อมูลเกี่ยวกับ Spray nozzle เพิ่มเติมได้ที่
World spray technology and design co.,ltd
ชาลินี ฉายรังสี (เก๋) ,086-3148623
line: kae-worldspray
